Concentrated Primer – PRIME C
Product introduction
Description
Acrylic copolymer based concentrated primer with high penetration and adherence.
Application Areas
- Plaster.
- Limewhite.
- Concrete surface.
- Old plastic painted surface.
- Gas concrete and/or super absorber surface.
- Water based.
- High penetration ability.
- Creates a binding bridge between paint and surface.
- Maximizes adhesion of paint on the surface.
- Decreases the absorbency of the surface it is applied.
- Increase leveling, prevent color differences between coats.
- Reduces the consumption of paint.
- Odorless.
- Environmental friendly.
Advantages
Surface Preparation
Application surface should be solid, clean, dry and in a self supporting condition. It should be clean off the dust after sanding the plaster and the similar surfaces.
Application
PRIME C 1/7 Concentrated Primer should be diluted with water in the ratio of 1/7 (1 cup of primer is thinned with 7 cups of water), then applied on the surface with using brush or roller. During application the surface and ambient temperature should be between +5°C and +30°C. The surface should be protected from frost. After applied the primer, minimum 4 hours should be waited for topcoat. Protect from rain, freezing and continuous high humidity until completely dry. Do not the use the Primers for isolation purpose and/or on the solvent based topcoat/primer.
Consumption
0,015 - 0,025 L / m² for one coat
Package
15 L / 2,5 L plastic bucket
Storage and Shelf Life
Can be stored for 2 years in a cool place by protecting against frost and direct sun light in its unopened package. Keep container closed when not in used.
Details
Place of Origin:Guangdong, China
Main Raw Material:Epoxy
Usage:Car Paint
Application Method:Spray
State:Liquid Coating
Brand Name:MJ COAT
Model Number:car paint manufacture-1c1e
Classification:1K
Basecoat Features:Magnificent optical effect, high gloss
Substrates:Existing finishes, 2k & 1k intermidiate primer
Color:Superfine
Silver Sample Time:Within 3 days
MOQ:100L
Product Keywords:acrylic raw material car 2k top color paint
Supply Ability:50000 Liter/Liters per Day
Packaging Details:1L*12 cans car paint manufacture
Port:Guangzhou or by requested
Lead Time :Within 25 days after receiving the deposit
| Classification | 1K Basecoat |
| Features | Magnificent optical effect, high gloss |
| Substrates | Existing finishes, 2k & 1k intermidiate primer |
| Color | Superfine Silver |
| Packing | 1L*12 cans |
| Sample Time | Within 3 days |
| MOQ | 100L |
| Product Keywords | acrylic raw material car 2k top color paint |
Features: It is high solid content and fast dry acrylic clear coat. Especially formulated for spray over 1K base coat to give very glossy finishing. Excellent yellow and weather resistant. Outstanding flow, leveling and anti-scratch. Good thick film and clear appearance.
|
NO. |
Test Item |
Quality Datas |
|
1 |
Item No. |
ES950/980 |
|
2 |
Product name |
High Solid Clear Coat |
|
3 |
specific gravity(KG/L) |
0.95±0.05 |
|
4 |
Viscosity |
35-45 Seconds |
|
5 |
spray pressure(MPA) |
3.0-3.5kg/cm² |
|
6 |
Solid content |
56% |
|
7 |
Ratio(clear coat:hardener:thinner) |
100:30:(15-25) |
|
8 |
Skin dry time (25℃) |
45 mins |
|
9 |
Fix time (25℃) |
12 hours |
|
10 |
Glossy(60°℃) |
98 |
|
11 |
Shelf life |
2 years in original sealer can in cool and dry place at 20℃. |
Application field
It is suitable for general anti-rust requirements and pay attention to decorative products, and can maintain good anti-corrosion effect in light corrosion environment. Used for general protection and temporary protection, such as engineering tracks, plate springs, outdoor railings, etc.
Construction description
1. Clean the oil, rust, old patent leather and other dirt on the surface of the substrate before painting to ensure that the surface of the substrate is clean and dry.
2. Grinding wheel is used to remove welding bumps, spatter, and hardened layer on the workpiece surface. All free edge acute angles after gas cutting, shearing or machining should be polished to R2.
3. Sand blasting to Sa2.5 level or power tool cleaning to St2 level, construction within 6 hours after sand blasting.
4. Brush painting and spraying can be used for construction, and the paint should be stirred evenly before painting. If the viscosity is high, an appropriate amount of deionized water can be added, and the amount of water added should not exceed 10%, and it should be stirred while adding to ensure that the paint is uniform.
5. Maintain good ventilation during construction, and do not recommend construction when the ambient temperature is lower than 5 ° C or the humidity is greater than 85%.
6. Rain, snow and fog weather can not be constructed outdoors, such as construction, can be taken to protect the paint film by covering it with tarpaulin.
Storage and transportation
1. The product should be sealed and stored in a dry and well-ventilated warehouse with a storage temperature above 5 ° C and below 35 ° C to prevent direct exposure to water and sunlight, isolate the fire source, and stay away from the heat source.
2. If the product meets the storage conditions, the storage period is one year from the date of production, and the storage period can be tested beyond the storage period. If it meets the standards, it can still be used.
3. During the transportation process, the product should be prevented from cold, rain and sunlight exposure, and should comply with the relevant provisions of the transportation department.
Where to Use
for interior masonry surface: brickwork, plaster, cement, and asbestos
for use on both new and previously painted surfaces.
Properties
excellent alkali resistance.
minimizes the risk of efflorescence and seals off the substrate.
Maximum hiding
Great for a variety of interior surfaces
Excellent all-around stain blocker
Quick drying
Low VOC, low odor
S3 Acrylic Based Primer can be stored up to 12 months in an elevated, cool dry place in original packaging.
Characteristics
Water-based
Acrylic
Good resistance to the elements. Contains a UV protector
Glossy or Matte finish
Excellent flexibility and hardness
Does not yellow
Easy to apply with a roller, air gun or brush (in some cases it may require dilution for better application)
Can be recoated
Good adhesion to paint and mineral surfaces like natural stone, plaster, stucco, etc.
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.
