H302 Waterborne two-part varnish
Product introduction
Acrylex Acrylic Exterior Paint - Acrylex
Acrylex
Description
Acrylic emulsion based topcoat for exterior surfaces with matt appearance and excellent hiding power. Paint can be produced with grained texture or without grain.
Application Areas
Applied successfully on exterior surfaces of all kinds of construction elements for decorative and protection purposes;
- Plastered surfaces.
- Concrete.
- Ytong, brick and eternit walls.
- Old painted surfaces.
Advantages
- Wide range of colors and applications.
- It has high resistance against weathering conditions, sunlight and water. It has excellent color retention and adhesion. It prevents the surface against to formation flake and blister
- Time and labor saving due to application easiness.
- Water based, human and environment friendly. High water vapor permeability, allowing building to breathe. Prevent the surface against fungi and bacteria.
Surface Preparation
Dirt, grease, old loose or flaking materials must be removed from the surfaces. Old painted, weak and chalky surfaces to be cleaned. PRIME-EX Exterior Primer is applied as a single layer either with brush or roller to ensure better adhesion and equal penetration of the paint into the surface. Cracks etc. to be repaired with EXPAST Acrylic Exterior Paste.
Application
After the surface preparation, ACRYLEX Acrylic Exterior Paint is diluted with 20 % water and can be applied 2 coats with brush, roller or spray. Wait minimum 12 hours between the coats.
Consumption
PRIME-EX Exterior Primer 0,090 - 0,140 L / m²
ACRYLEX Acrylic Exterior Paint 0,200 - 0,250 L / m²
Package
15 L / 7,5 L / 2,5 L plastic bucket
Storage and Shelf Life
1 year as of the production date in dry and moisture-free environment provided that packages will not be opened. Package should be kept tightly closed when not in use. Package should be protected against frost.
| 20kg/drum 24.5t/container Packing:50kg | |
| product name | price |
| Water-based antirust paint | 1.1us/kg |
| Water-based primer and primer-anti-rust paint | 1.18us/kg |
| Water-based metal finishes paint | 1.23us/kg |
| Water-based fast drying dip paint | 1.32us/kg |
| Water-based alkyd enamels | 1.31us/kg |
| Water-based alkyd antirust paint | 1.33us/kg |
| Water-based alkyd antirust paint Waterborne protective paint | 1.29us/kg |
| Water-based Acrylex Acrylic Exterior Paint | 1.31us/kg |
| Water-based Acrylic emulsion-based exterior primer. | 1.29us/kg |
| 1.24us/kg | |
| epoxy primer, waterborne epoxy primer, waterborne epoxy topcoat | 1.18us/kg |
| Water-based epoxy cloud iron intermediate paint | 1.23us/kg |
| Water-based inorganic zinc rich primer | 1.27us/kg |
| Water-based polyurethane hammertone paint | 1.23us/kg |
| Water-based low-temperature baking paint, waterborne metal baking paint | 1.24us/kg |
| Water-based epoxy floor paint, waterborne metal paint | 1.25us/kg |
Product Application
1.Durable Moisture and Chemical Resistant Film
2.Low Odor
3.Low VOC and HAPs Free
4.Formaldehyde Free
5.Quick Dry
6.Quick Stack Time
7.Excellent Film Building Properties
8.Excellent Flow and Leveling
9.Minimum Grain Raise
10.Resists Yellowing
11.Meets KCMA Performance Requirements, When Applied to Manufacturer’s Specifications
12.24 Hour Pot Life-Can Be Re-Catalyzed Once
Recommended use for storage tanks, rail transportation, functional vehicles, power facilities, transformers, distribution cabinets, machinery and equipment such as high anti-corrosion and decorative coating.
Details
Details
Technical parameters Drying time (25'℃) Surface drying 1 hour
Hands-on 24 hours
Drying 1 hour (60-80°C)
Fully cured 7 days
Gloss ≥80% (60°)
Film hardness H
Paint film adhesion level 4
Paint film flexibility 2mm
Impact resistance of paint film 50cm-kg
Artificial aging resistance 1000h
Methods of application
The first step is to apply MyCover as a primer sealer so that later MySealant 2K, as a two-component water-based polyurethane varnish, creates the perfect protective film. You must wait 4 hours after the application of MyCover.
MySealant 2K is applied on the microcement coating in two layers and the drying time between layers is from 8 to 24 hours, depending on environmental conditions and taking into account that humidity delays drying. After the first layer, the surface should be sanded with a 400 grit sander, while the final layer does not require any sanding.
It should not be applied in environments with a temperature that is below 15ºC and for optimal results it is advisable to apply it at temperatures ranging between 18 and 24ºC. The polyurethane varnish can be applied with a fiber roller or gun.
Advantages
1.Very low VOC levels (Volatile Organic Compounds), being less aggresive to the environment and the painter
2.Provides highs resistance to corrosion with over 400 hours in salt spray and humid chamber tests
Construction description
Ingredients A, B two components
Mixing ratio 3:1 (weight ratio)
Mixing method: Mix component A thoroughly, add component B and continue mixing until smooth.
Coating thickness Dry film thickness 20 μ m
Wet film thickness 50 μ m
Maturing period (25℃) 10-15min
Service period (25°C) 3h
Re-coating interval 12h minimum 4Bh maximum
Maintenance
When directly applied on the surface of the primer, the primer shall be polished, clean, dry, free of rust and oil stains. When coated on the surface of the primer, the primer surface should be clean, dry and free of dirt.
Use conditions Construction temperature 10-35 ℃, mixing degree 30-75%, good ventilation conditions.
Notes
- Do not clean the surface with chemical products or cleaners that contain abrasive substances. The use of bleach and detergents is especially contraindicated.
- Clean the coating with water and MyCleaner or neutral soap
- Do not cover the microcement sealant until two weeks have passed since the application
- Before wetting it, it is necessary to let the polyurethane varnish dry for at least one week. Keep in mind that the fullness of its chemical properties is achieved after two weeks.
| Recommended Paint System | 2 coats of Maydos transparent putty for patching imperfection |
| 1 coat of Maydos water-based wood varnish primer | |
| 2 coats of Maydos water-based wood finish | |
| Clean up: Clean all equipment with clean water immediately after use | |
| Storage:Store in cool(temperature range 5℃-45℃), dry and well-ventilated place and keep it out ofthe reach of children | |
| Preparation and Application | 1. Before application, stir the paint completely and evenly, filter and then wait until bubbles disappear. |
| 2. The painted surface with PU, NC paint etc must be sanded completely to make it matte and then clean the sanding scrap. The application should be done evenly and do not apply too thick for one time. | |
| 3. If the wood has been applied solvent-based primer, then at least two weeks should be given to let it dry completely. | |
| 4. The wood surface must be dry, clean, strong and free of contaminants. Sand it with sanding paper (320#) in the same direction as wood grain. Fill the holes and cracks in the wood with transparent putty. | |
| 5. Apply 1-2 coats of putty on the treated wood. The recoat time is 2 hours and it is better to sand each coat with sand paper (400#). If the wood is very coarse, then more coats are suggested. | |
| 6. Dilute primer with 10-20% clean water and 2-3 coats are suggested. The recoat time is 3-4 hours and sand the first coat with sand paper (600#) and (800#) for the rest. | |
| 7. Dilute finish with 10-20% clean water and 2-3 coats are suggested. The recoat time is 4-5 hours and sand it lightly with sand paper (800-1000#). | |
| Good Remind | 1. For better application experiences, please complement with other Maydos products. |
| 2. Application environmental condition (above 8°C and relative humidity below 85%). | |
| 3. The dilution water quantity varies from temperature and humidity. More water at low temperature and high humidity, and less at high temperature and low humidity. | |
| 4. Prevent the paint film from wetting and don’t put wet things on it before it is dry. Recoat time varies from the weather. | |
| 5. Under normal condition, the maintenance period of paint film is one week, but it should be longer in case of low humidity and thick paint film. |
FAQ
Q. Are you factory or trading company?
A. We are a factory located in Fuan city, Fujian province, China .
Q. Are all colors are same price?
A.No, the price are different depend on the texture, availability, Ingredients and So on.
Q. Can you provide samples for quality checking before placing an order?
A. Samples are available upon request, but the shipping cost should be paid by customer.
Q. Is there a discount?
A. The discount will be given by the quantity.
Q. How about delivery time?
A. About 7-15 days after payment confirmed.
Q. What kind of payment terms you can accept?
A. We accept T/T, LC, Western Union and Paypal.
