H802 Waterborne alkyd enamels
Product introduction
This product is refined from the special water-based] risk, filler, various functional additives and deionized water and other raw materials, with water and good diluent, easy to apply, high gloss paint film, good leveling, etc., excellent adhesion to various metal substrates.
Waterborne Alkyd Enamel is a high quality interior enamel designed for use on trim and accent areas where a smooth, durable finish is desired. Formulated to provide good hide and a fast dry time so projects can be completed quickly. Ideal for wood, MDF, masonry, and drywall in residential repaint, commercial, and new construction applications.
FEATURES:
- Excellent durability
- Excellent flow and leveling properties
- Extended open time
- Very High Gloss
- Spatter resistant
- Easy application
- Easy clean up
- Block resistant
- Interior/exterior use
Ideal for interior doors, trim, cabinets, walls, and ceilings. For primed or previously painted wallboard, plaster, masonry, wood and metal. Recommended for exterior use on properly primed metal, masonry, and stable trim substrates such as cedar and redwood.
CERTIFICATIONS
- CHPS Certified (Collaboration for High Performance Schools)
- Qualifies for LEED® Credit (INTERIOR NON-FLAT)
Recommended For: Ideal for interior doors, trim, cabinets, walls, and ceilings. For primed or previously painted wallboard, plaster, masonry, wood and metal. Advance Gloss is recommended for exterior use on properly primed metal, masonry, and stable trim substrates such as cedar and redwood.
Coverage: 400-500 sq.ft./gal
Dry Times:
- To touch: 4-6 hours
- Recoat: 16 hours
Details
|
Size |
1 Qt. |
|
Color |
Clear Base |
|
Sheen |
Satin |
|
Formulation |
Waterborne/Alkyd |
|
Paint & Primer In One |
No |
|
Approx.Coverage |
100 Sq. Ft. |
|
Dries To Touch |
2 Hr. |
|
Time Before Recoating |
4 Hr. |
|
Clean-Up |
Soap & Water |
|
Color Family |
Tint Base |
|
Mildew Resistant |
No |
|
UPC |
00035777881613 |
|
Package Quantity |
1 |
|
Unit of Measurement |
QT |
Aquanamel Waterborne Alkyd Enamel is a premium quality coating that offers superb flow and leveling, and a smooth durable finish. Provides the convenience and ease of use of a waterborne coating with the application and performance of a traditional oil-based paint. Dry to touch: 1 to 2 hours. Time to recoat: 4 hours. Easy to apply and cleans up with soap and water. Ideal for use on interior trim, doors, and cabinets. Lifetime warranty.
- Provides a smooth factory like finish
- Stands up to daily use due to high quality durability
- Fade, Scratch, and Scuff Resistance
- Easy application with brush, roll, or spray
- Tintable to hundreds of colors
- Superb flow and leveling with a smooth durable finish
- Ideal for use on interior trim, doors, and cabinets
- Technical parameters Color Various colors
Flexibility（mm) ≤1
Impulse (kg.cm) 50
Water Resistant(50±5μm) 72h without blistering and without peeling off.
Adhesion (class)
Surface treatment: The surface of the coated material should be free of moisture, oil, acid and ash.
Steel with oxide skin: Shot blast or sand blast and other methods to Sa2.5 grade, where sand blasting treatment is not possible, should be mechanical polishing or sand blasting.
Chemically treated to remove all floating shoulder fragments.
Steel without oxide skin: gritted (shot blasted) to Sa2.5 or sanded to $t3 with air or electric grinding tools.
Burned parts from welding, flame cutting or pyrotechnic correction: polished to St3.
Base material with old paint film: remove the loose old paint film and rust, and grind to St3 grade with air or electric grinding tools.
Painting support This product can be used with H901 water-based antirust paint, H801 water-based rust-inducing acid antirust paint, and also can be used with oil-based alkyd antirust paint. This product can also be used alone. However, consultation and verification of compatibility should be carried out before use.
Construction data Ventilation condition, mixing degree, film thickness and other factors will affect the drying time accordingly.
surface≤24h (25℃℃)
solid practical work
The oretical coating rate ≤0.5h(25℃)
0.15-0.2kg/m' (dry film 40-50 μm)
Reapplication time
Recommended number of coats Can be repainted after actual, or wet touch and spray until the film is embedded (paint film must not hang).
1 channel 20-30μm, 2 dry film channels 40-60μm
The above data is for guidance only, the specific repainting time may be longer or shorter depending on temperature, film thickness, ventilation, assembly requirements and mechanical conditions.
Application
Stir thoroughly before and during use. Apply one or two coats. For best results, use a premium nylon/polyester brush and/or premium microfiber roller. Apply paint generously from unpainted area into wet area. This product can also be sprayed.
Main characteristics
1. Good leveling, large brush area.
2. High gloss, good fullness.
3.good water resistance, light preservation and color preservation of paint film.
Recommended use It can be used for long time anti-corrosion steel structure, industrial equipment, cast iron, carbon steel and other metal products, wood components and other surface protection and decoration.
Construction description
1. This product can be air gorge coating, brush coating, silver coating.
2 before use, first touch the paint residue mix evenly, different construction methods add different amounts of water, air diaoxiao add about 5%-15% water dilution.
Add about 10% water dissipation release to the brush coat, and add it as you set, to ensure the book is evenly spread, and filter the air bubbles with 100 mesh.
Filter out the net before construction.
3. It is forbidden to mix with other paints, organic solvents, strong acids or strong alkalis.
The construction environment and other explanatory data are the same as "H901 waterborne antirust paint", please refer to.
Construction environment
The construction site should be well ventilated and dusted to ensure the quality of construction.
The construction environment should be at least 5' and relative humidity should be <70%.
The temperature of the substrate should not be less than 5', and the well should be more than 3℃ above the dew point of the air.
Cleaning of tools After construction, the tools should be immediately rinsed with water to prevent dryness, and the remaining paint should be kept in a closed place.
Surface treatment
Surfaces to be painted must be clean, dry, and free of dirt, dust, grease, oil, soap, wax, scaling paint, water soluble materials, and mildew. Remove any peeling or scaling paint and sand these areas to feather edges smooth with adjacent surfaces. Glossy areas should be dulled. Drywall surfaces must be free of sanding dust. New plaster or masonry surfaces must be allowed to cure before applying base coat. Cured plaster should be hard, have a slight sheen and maximum PH of 10; soft, porous or powdery plaster indicates improper cure. Never sand a plaster surface; knife off any protrusions and prime plaster before and after applying patching compound. Poured or pre-cast concrete with a very smooth surface should be etched or abraded to promote adhesion, after removing all form release agents and curing compounds. Remove any powder or loose particles before priming. Wood substrates must be thoroughly dry.
Priming: New surfaces should be fully primed, and previously painted surfaces may be primed or spot primed as necessary.
Notes
Although Advance yellows less than conventional alkyds, a slight amount of yellowing may occur. This effect is accelerated in dark or poorly ventilated areas and is more visible in lighter colors.
Caution
1. This product should not be mixed with any oil-based paint or organic solvent.
Avoid contact with organic solvents and water before the paint is completely dry, and do not press or rub heavily to avoid destruction of paint film. If the recoating time is too long, it is easy to cause secondary pollution. If the repainting time is too long, it is easy to cause secondary pollution, and must be polished before repainting.
2. workers should wear necessary labor protective equipment.
Store in a dry and ventilated place (5-40℃) for 12 months, after this period, it can still be used after inspection.
3.Loading and unloading should be done carefully and gently to avoid collision and leakage.
4.Packing specification: 20kg or 50kg in general. Iron drum or plastic drum. (Packed in different specifications according to user requirements)
5.The following measures shall be guaranteed during construction.
Avoid contact with skin and eyes. If the water-based paint comes in contact with skin, wash with warm water. If the water-based paint comes in contact with the eyes, wash with warm water.Flush well with plenty of water and get medical attention immediately.
6.Keep out of reach of children.
7.Observe all health and safety regulations on site.
8.For detailed information on health and safety and precautions for use of this product, consult the technical instructions.
