H902 Waterborne primer and rust preventive paint
Product introduction
Environmentally friendly single-component self-drying topcoat. With water as the diluent, it is green, safe, environmental friendly, non-inflammable and non-explosive, with stable and reliable performance and good color and light preservation.
1. Low voc emission, using water as diluent, green environmental protection.
Non-flammable and explosive materials can be transported as non-dangerous, safe and reliable.
lt has good adhesion to the steel substrate and excellent physical and mechanical properties after drying
4. Fast drying, easy construction.
Recommended Uses lt is used for various types of painting of steel structures. lncluding large steel structures, outdoor steel components, net frames, community metal fences, various types of cast iron parts and other metal products, etc. lt can also be used for maintenance and repair decoration
Technical parameters Color various colors Surface dry (50% humidity)15'C C<th i 25 °C<0.5h gloss 20%-60% (adjustable) Solid dry (50%humidity) 15 °C C<48h; 25 C C<24h
Adhesion (Bacchus method) Grade 1, Zero Curve 1mmlmpulse 50kg.cm
Surface treatment The surface to be painted must be clean, free of moisture, acid and alkali, and no oil stains.
Steel with oxide skin: treated to Sa2.5 by blasting or sandblasting, and where sandblasting is not possible, mechanically sanded or chemically treated to remove all floating broken shoulders.
Steel without oxide skin: sandblasted to Sa2.5 or sanded to St3 with air or electric grinding tools.
Welding, flame-cutting or pyrotechnically correcting burnt parts:beaten to St3
Base material with old paint film: remove the loose old paint film and rust, and sand to St3 level with air or electric sanding tools.
Construction data Ventilation conditions, temperature, paint thickness and other factors will affect the drying time accordingly, the typical data listed is based on the following conditions Re-coat after drying, or wet mix until the paint (paint should not hang).
Recommended number of coating courses 1 course 20-30 um, 2courses dry film 40-60 um
The above data is for guidance only. The specific repainting time maybe longer or shorter, depending on humidity, particle thickness, ventilation,loading requirements and mechanical strength requirements.
Caution and other data are the same as for "H901 waterborne antirustpaint", please refer.
Details
Place of Origin:Guangdong, China
Main Raw Material:Epoxy
Usage:Car Paint
Application Method:Spray
State:Liquid Coating
Brand Name:MJ COAT
Model Number:car paint manufacture-1c1e
Classification:1K
Basecoat Features:Magnificent optical effect, high gloss
Substrates:Existing finishes, 2k & 1k intermidiate primer
Color:Superfine
Silver Sample Time:Within 3 days
MOQ:100L
Product Keywords:acrylic raw material car 2k top color paint
Supply Ability:50000 Liter/Liters per Day
Packaging Details:1L*12 cans car paint manufacture
Port:Guangzhou or by requested
Lead Time :Within 25 days after receiving the deposit
Classification | 1K Basecoat |
Features | Magnificent optical effect, high gloss |
Substrates | Existing finishes, 2k & 1k intermidiate primer |
Color | Superfine Silver |
Packing | 1L*12 cans |
Sample Time | Within 3 days |
MOQ | 100L |
Product Keywords | acrylic raw material car 2k top color paint |
Features: It is high solid content and fast dry acrylic clear coat. Especially formulated for spray over 1K base coat to give very glossy finishing. Excellent yellow and weather resistant. Outstanding flow, leveling and anti-scratch. Good thick film and clear appearance.
NO. |
Test Item |
Quality Datas |
1 |
Item No. |
ES950/980 |
2 |
Product name |
High Solid Clear Coat |
3 |
specific gravity(KG/L) |
0.95±0.05 |
4 |
Viscosity |
35-45 Seconds |
5 |
spray pressure(MPA) |
3.0-3.5kg/cm² |
6 |
Solid content |
56% |
7 |
Ratio(clear coat:hardener:thinner) |
100:30:(15-25) |
8 |
Skin dry time (25℃) |
45 mins |
9 |
Fix time (25℃) |
12 hours |
10 |
Glossy(60°℃) |
98 |
11 |
Shelf life |
2 years in original sealer can in cool and dry place at 20℃. |
Application field
It is suitable for general anti-rust requirements and pay attention to decorative products, and can maintain good anti-corrosion effect in light corrosion environment. Used for general protection and temporary protection, such as engineering tracks, plate springs, outdoor railings, etc.
Construction description
1. Clean the oil, rust, old patent leather and other dirt on the surface of the substrate before painting to ensure that the surface of the substrate is clean and dry.
2. Grinding wheel is used to remove welding bumps, spatter, and hardened layer on the workpiece surface. All free edge acute angles after gas cutting, shearing or machining should be polished to R2.
3. Sand blasting to Sa2.5 level or power tool cleaning to St2 level, construction within 6 hours after sand blasting.
4. Brush painting and spraying can be used for construction, and the paint should be stirred evenly before painting. If the viscosity is high, an appropriate amount of deionized water can be added, and the amount of water added should not exceed 10%, and it should be stirred while adding to ensure that the paint is uniform.
5. Maintain good ventilation during construction, and do not recommend construction when the ambient temperature is lower than 5 ° C or the humidity is greater than 85%.
6. Rain, snow and fog weather can not be constructed outdoors, such as construction, can be taken to protect the paint film by covering it with tarpaulin.
Storage and transportation
1. The product should be sealed and stored in a dry and well-ventilated warehouse with a storage temperature above 5 ° C and below 35 ° C to prevent direct exposure to water and sunlight, isolate the fire source, and stay away from the heat source.
2. If the product meets the storage conditions, the storage period is one year from the date of production, and the storage period can be tested beyond the storage period. If it meets the standards, it can still be used.
3. During the transportation process, the product should be prevented from cold, rain and sunlight exposure, and should comply with the relevant provisions of the transportation department.
Where to Use
for interior masonry surface: brickwork, plaster, cement, and asbestos
for use on both new and previously painted surfaces.
Properties
excellent alkali resistance.
minimizes the risk of efflorescence and seals off the substrate.
Maximum hiding
Great for a variety of interior surfaces
Excellent all-around stain blocker
Quick drying
Low VOC, low odor
S3 Acrylic Based Primer can be stored up to 12 months in an elevated, cool dry place in original packaging.
Characteristics
Water-based
Acrylic
Good resistance to the elements. Contains a UV protector
Glossy or Matte finish
Excellent flexibility and hardness
Does not yellow
Easy to apply with a roller, air gun or brush (in some cases it may require dilution for better application)
Can be recoated
Good adhesion to paint and mineral surfaces like natural stone, plaster, stucco, etc.
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.