-
N,N-Dimethyl-p-toluidine CAS: 99-97-8 DMPT purity： ≥99%
N,N-dimethyl-p-toluidine is a colorless or light yellow oily liquid with a smell of rotten eggs. Its melting point is 130.31℃, its boiling point is 211.5-212.5℃, its weight at normal Chemicalbook temperature is 0.9287~0.9366g/mL, and its refractive index 1.5360~1.5470, insoluble in water, soluble...Read more -
Ethyl N-acetyl-N-butyl-β-alaninate CAS:52304-36-6 BAAPE IR3535 purity： ≥99%
BAAPE has been used in Europe for more than 20 years and is considered a safer and less toxic broad-spectrum repellent than DEET. Research has confirmed that DEET has no obvious toxicity when ingested by the digestive tract, inhaled by the respiratory tract, or used on the skin, and can be appli...Read more -
Monoethanolamine CAS 141-43-5 MEA purity: ≥99%
Physical and chemical properties Ethanolamine is also called “aminoethanol”. Chemical formula HOCH2CH2NH2. Molecular weight 61.08. Colorless viscous liquid. Easy to absorb moisture and smell of ammonia. Specific gravity 1.0117 (25/4℃). Melting point 10.3℃. Boiling point 170.8℃. Refrac...Read more -
2,2′-(P-TOLYLIMINO)DIETHANOL CAS:3077-12-1 PURITY：99% NDPT
N,N-dihydroxyethyl-p-methylaniline can be in the form of a colorless to pale yellow solid or a light yellow liquid. Specifically, there are some differences in the description of the appearance of this compound, which may be due to its different physical states or preparation processes. Some sou...Read more -
2-Chlorobenzotrifluoride CAS : 88-16-4 PURITY : ≥99%
2-Chlorobenzotrifluoride Chemical properties: This product is a colorless liquid。 insoluble in water. Use: Used as an intermediate for the synthesis of fluorine-containing medicines, pesticides, dyes, etc. Production method The preparation method is to add o-chlorotoluene in the reaction kettle,...Read more -
3-Nitrotoluene CAS:99-08-1 PURITY：99%
M-nitrotoluene is in the form of yellow liquid or crystals, and is sometimes described as a light yellow oily liquid with the smell of nitrobenzene. This description may vary depending on the purity, storage conditions or viewing angle of m-nitrotoluene, but in general, it exists in liqui...Read more -
Triethylamine CAS:121-44-8 PURITY：99%
Triethylamine is a colorless oily liquid with a strong ammonia odor or fishy smell, similar to the smell of ammonia water, and slightly fumes in the air. Specifically, triethylamine appears as a colorless to light yellow transparent liquid, slightly soluble in water, but soluble in organic solve...Read more -
3-Dimethylaminopropylamine CAS:109-55-7 N,N-Dimethyl-1,3-propanediamine DMAPA purity： ≥99.5
Dimethylaminopropylamine (DMAPA), as an important organic chemical raw material, has a wide range of applications. Dimethylaminopropylamine, referred to as DMAPA, is an organic raw material intermediate with the chemical formula C5H14N2. It appears as a transparent liquid, is flammable, and is s...Read more -
Diethylenetriamine CAS 111-40-0 DETA purity :≥99%
Diethylenetriamine, with the chemical formula C4H13N3, is an organic compound, usually a light yellow or colorless transparent liquid with a slight ammonia smell. It has good solubility and is miscible with water, ethanol, acetone and other solvents. It is an important member of the chemical indu...Read more -
2-(2-Aminoethylamino)ethanol CAS: 111-41-1 AEEA PPURITY : ≥99%
2-(2-Aminoethylamino)ethanol CAS: 111-41-1 It is a colorless, light yellow transparent viscous liquid. It is hygroscopic, strongly alkaline, and has a slight ammonia smell. Miscible with water and alcohol, slightly soluble in ether. It is used to produce dyes, resins, rubber, flotation agents, in...Read more -
Diethylamine CAS 109-89-7 DEA Purity:≥99.3 For industrial use
DEA ( Diethylamine) Chemically it is a colorless, volatile flammable liquid with a strong ammonia odor. Miscible with water, ethanol, ether and other organic solvents. Usage: Diethylamine is a solvent and chemical raw material intermediate. It can be used to prepare drugs such as procaine, chloro...Read more -
Diethyl-m-toluamide CAS 134-62-3 DEET Pesticide , Mosquito Repellent, Purity : 99%
chemical properties CAS No. 134-62-3 Molecular formula C12H17NO Molecular weight 191.27 EINECS No. 205-149-7 Melting point -45°C Boiling point 111°C1mmHg Density 0.998g/mL at 20°C (lit.) Vapor pressure <0.01mmHg (25°C) Refractive index n20/D1.523 (lit.) Flash point >230°F Form liquid color ...Read more
