news

Product description: Environmentally friendly single-component self-drying topcoat. With water as the diluent, it is green, safe, environmental friendly, non-inflammable and non-explosive, with stable and reliable performance and good color and light preservation.

1. Low voc emission, using water as diluent, green environmental protection.

Non-flammable and explosive materials can be transported as non-dangerous, safe and reliable.

lt has good adhesion to the steel substrate and excellent physical and mechanical properties after drying

4. Fast drying, easy construction.

Recommended Uses lt is used for various types of painting of steel structures. lncluding large steel structures, outdoor steel components, net frames, community metal fences, various types of cast iron parts and other metal products, etc. lt can also be used for maintenance and repair decoration

Technical parameters Color various colors Surface dry (50% humidity)15′C C<th i 25 °C<0.5h gloss 20%-60% (adjustable) Solid dry (50%humidity) 15 °C C<48h; 25 C C<24h

Adhesion (Bacchus method) Grade 1, Zero Curve 1mmlmpulse 50kg.cm

Surface treatment The surface to be painted must be clean, free of moisture, acid and alkali, and no oil stains.

Steel with oxide skin: treated to Sa2.5 by blasting or sandblasting, and where sandblasting is not possible, mechanically sanded or chemically treated to remove all floating broken shoulders.

Steel without oxide skin: sandblasted to Sa2.5 or sanded to St3 with air or electric grinding tools.

Welding, flame-cutting or pyrotechnically correcting burnt parts:beaten to St3

Base material with old paint film: remove the loose old paint film and rust, and sand to St3 level with air or electric sanding tools.

Construction data Ventilation conditions, temperature, paint thickness and other factors will affect the drying time accordingly, the typical data listed is based on the following conditions Re-coat after drying, or wet mix until the paint (paint should not hang).

Recommended number of coating courses 1 course 20-30 um, 2courses dry film 40-60 um

The above data is for guidance only. The specific repainting time maybe longer or shorter, depending on humidity, particle thickness, ventilation,loading requirements and mechanical strength requirements.

Caution and other data are the same as for “H901 waterborne antirustpaint”, please refer.

Product Detail

Classification 1K Basecoat
Features Magnificent optical effect, high gloss
Substrates Existing finishes, 2k & 1k intermidiate primer
Color Superfine Silver
Packing 1L*12 cans
Sample Time Within 3 days
MOQ 100L
Product Keywords acrylic raw material car 2k top color paint

Features: It is high solid content and fast dry acrylic clear coat. Especially formulated for spray over 1K base coat to give very glossy finishing. Excellent yellow and weather resistant. Outstanding flow, leveling and anti-scratch. Good thick film and clear appearance.HLB1DtU7RzTpK1RjSZKPq6y3UpXaK HTB1CX_7OhTpK1RjSZR0q6zEwXXaJ.jpg_.webp

 


Post time: Mar-11-2024