other name:

dicyandiamide formaldenyde resin

safety:

harmless no-flammable

Product name:

Flocculant for paint fog waste water treatment

Application:

painting water treatment

 Packaging Details

Flocculant for paint fog waste water treatment
It is packed in plastic drums with each containing 30kg, 50kg, 250kg , 1000kg, 1250kg IBC tank or others according to your requirements.

Port

shanghai

paint spray  flocculant  water decoloring agent Paint fog flocculant Clean water Chemicals  Print fog flocculant

I. Properties of paint spray  flocculant

1. Non-combustible

2. Free of formaldehyde, heavy metals and other harmful substances.

3. No distinctive smell

4. Freezing point ≤ 0°C

5. Storage period at room temperature ≥ 6 months

2、Quality requirements for paint flocculant

1. water pH value without adjustment (optional) – water pH value adjustment requirements 7.5-9

3. Paint flocculant addition criteria.

Conventional addition criteria.

Agent A circulating water inlet, add 4-5 parts per thousand of the circulating water.

Agent B recycled water outlet, add 4-5 parts per thousand of recycled water.

4. Water quality requirements after treatment with paint flocculant

1. Appearance: paint dregs condense and float, water becomes clear.

2. Condensed floatation rate: ≥95% – daily measurement

3. Odour: odourless – one nose smell

4. Pool foam height: ≤5cm

5. Perspective: ≥ 15cm – daily measurement

6. Sludge stickiness: no stickiness with one hand touching the sludge

7.COD content:≤100mg/ml

8. water quality life: ≥ 6 months: (recycled water conductivity ≥ 500mm/cm for water change)

V. Test methods for small samples of paint flocculant.

Step 1: Fill a mineral water bottle with 350-400 ml of water.

Step 2: Add 5ml of Agent A and shake vigorously for a dozen times with the lid on.

Step 3: Add 3ml of paint, cover with a lid and shake vigorously for a dozen times.

Step 4: Finally, add 5 ml of Agent B, cover the lid and shake vigorously for a few more times, the dregs of paint cohesion suspended, and then leave for 3 minutes!

Observe the effect.

Specifications

Density: 1000–1100

Solid Content: 7.0±1.0%

Main components: cationic polymer

Appearance: clear liquid with light blue

PH value: 1.0~2.5

Solubility: completely soluble in water

Coagulant for paint fog is composed of agent A & B. Agent A is one kind of special treatment chemical for removing the viscosity of paint. The main composition of A is organic polymer. When added into water recirculation system of spray booth, it can remove the viscosity of remaining paint, remove the heavy metal in water, keep the biological activity of recirculation water, remove COD, and reduce the cost of waste water treatment. Agent B is one kind of super polymer, it is used to flocculating the residue, make the residue in suspension for easily treat.

1) Coagulants for paint fog (Coagulants)  Agent A

Main functions: To “catch” overspray paint that dropped into the circulating water, eliminate the paint’s viscosity completely, and then drive the surrounded paint drops floating up.
Main principles: Due to high E-charge, the product has strong attractive power to the paint drops which would be entirely surrounded and the functional group would be penetrated and destroyed via chemical actions.
Other functions: To break the stable state of the surfactant or other impurities in water and grasp them out, which is so important to keep the water clean.

Water treatment chemicals for spray booth Water treatment chemicals for spray boothWater treatment chemicals for spray booth

2) Flocculating agent(Floatation agent)  Agent B

Main functions: To gather all the paint particles and impurities, increase their efficiency of mechanical dehydration. To balance out the E-charge in the system, keep the ionic equilibrium.
Main principles: Large molecular weight to speed up the floating-up.
Other functions: To gather other suspended solid particles.

Packaging & Shipping

       A agent It is packaged in PE drums, each containing 25KG, 50KG & 1000KG/IBC.

    B agent it is packaged with 25kg double plastic bag

pecification (Agent A):

Density: 1000—1100kg/m3

Solid Content: 7.0±1.0%

Main components: cationic polymer

Appearance: clear liquid with light blue

PH value: 1.0~2.5

Solubility: completely soluble in water

Packaging & Shipping

A agent It is packaged in PE drums, each containing 25KG, 50KG & 1000KG/IBC.

B agent it is packaged with 25kg double plastic bag

Water Decoloring Agent

Paint Mists Flocculant  A B Agent
Poly Aluminium Chloride(PAC)
PolyDADMAC
Polyamine
Polyacrylamide (PAM)/Polyelectrolyte
Dicyandiamide (DCDA)
ACH(Aluminum Chlorohydrate)

Related water treatment chemicals,etc