Waterborne Epoxy Primer is a high technology epoxy coating that is suitable for commercial and industrial use. Thus, installation by professional epoxy installers is recommended. As with most high performance coating systems, the performance, durability, and overall efficacy of this product depends highly on correct surface preparation as well as on correct product application procedures. If surface preparation and/or application procedures are not followed, the product warranty will be voided. It is critical for proper product performance that surface preparation and application procedures are followed.

1. Like all epoxy paint, powder and fade will occur when exposed to atmospheric environment, but these phenomena have no effect on the overall corrosion resistance.

2. Apply the product by brush or silver coating, it may be necessary to apply multiple passes to obtain the specified dry film thickness. Excessive coating thickness should be avoided, and the wet film thickness of a film formation should not exceed 150μm.

3. High salt spray resistance, excellent corrosion resistance, excellent oil resistance, water resistance, salt water resistance, solvent resistance: the paint film is tough and dense, and the substrate has good adhesion. The thickness of the paint film is above 85 microns, and the corrosion resistance is better.

4. Low temperature curing. This product is a water-based system, not suitable for low temperature environment, the temperature below 10C is not recommended for construction, because the product below 10C conditions, can not be fully cured, below 0C products will freeze, can not be used.

It is suitable for metal coating in various heavy anti-corrosion fields. It is suitable for rust prevention and corrosion prevention of large steel structure, bridge, ship, tower crane, tower, oil storage tank, truck fork, lifting boom and other steel components.