Silicone Exterior Paint – Explus
Product introduction
Description
Silicone based, water borne, matt exterior paint for using decorative and protection purposes.
Application Areas
All types of exterior mineral facades; plaster, putty, cement, brick, concrete etc.
Advantages
- Wide range of colors and applications.
- It has high resistance against weathering conditions, sunlight and water. It prevents the surface against to formation flake and blister. It has excellent color retention and adhesion
- Time and labor saving due to application easiness.
- Water based, human and environment friendly. High water vapor permeability, allowing building to breathe. It prevents the surface against fungi and bacteria.
Surface Preparation
Dirt, grease, old loose or flaking materials must be removed from the surfaces. PRIME-EX Exterior Primer is applied as a single layer either with brush or roller to ensure better adhesion and equal penetration of the paint into the surface. Cracks etc. to be repaired with EXPAST Acrylic Exterior Paste.
Application
After the surface preparation, EXPLUS Silicone Exterior Paint is diluted with 20 % water and can be applied 2 coats with roller. Wait minimum 12 hours between the coats.
Consumption
PRIME-EX Exterior Primer 0,090 - 0,140 L / m²
EXPLUS Silicone Exterior Paint 0,200 - 0,250 L / m²
(for two layers)
Package
15 L / 7,5 L and 2,5 L plastic bucket
Storage and Shelf Life
1 year as of the production date in dry and moisture-free environment provided that packages will not be opened. Package should be kept tightly closed when not in use. Package should be protected against frost.
Details
This product is made of special propyl acid emulsion, anti-iron CAI filler, a variety of functional benefits and deionized water refined, is the best alternative to traditional solvent steel structure paint products.
Main features Low VOC emission, water as diluent, green environmental protection.
The paint strand has good water resistance, fast drying speed and easy construction.
4 Has good adhesion to steel substrate, excellent physical and mechanical properties after drying.
Recommended use Suitable for all kinds of steel structure light anti-win, anti-rust requirements of the matching finish coating. Including large steel structure, outdoor steel components, grid area metal fence, all kinds of cast iron and other metal products, can also be used for maintenance repair protection primer.
Technical parameters Color color
Surface dry (50% humidity) 15℃C< 1h; 25'< 0.5 h.
Work (50% humidity) 15℃C< 48h; 25℃C< 24h
Punch (ki.cm) 50
Water (50±5μm) 72h paint film does not bubble, does not fall off, does not rust≥70%
A water-based acrylic topcoat is characterized in that it includes water-based acrylic emulsion 10 ~ 60wt %, coloring pigment 3 ~ 25wt %, filler 5 ~ 20wt %, film forming agent 2 ~ 15wt %, leveling thickener 0.5 ~ 1.5wt %, softening water 9 ~ 23wt %, and other additives 0.5 ~ 2.6wt %; The other additives include dispersant, wetting agent, defoamer, preservative, anti-mildew agent and neutralizer.
Surface treatment The surface of the coating is required to be free of moisture, oil, acid, ash and slag.
Steel with oxide skin: shot blasting and other methods to 5a2.5 level, in the place that can not be sandblasted should be mechanically polished or
Chemical treatment to remove all floating shoulders.
Non-oxide steel: spray second (shot blasting) treatment to Sa2.5, wind or electric grinding tools to St3.
Welding, flame cutting or pyrotechnical burning parts: grinding to St3 level.
Old paint film substrate: Remove loose old paint film and rust, and polish it to St3 level with pneumatic or electric grinding tools.
Typical coating kit can be used with H901 water-based anti-rust paint, can also be used alone as a general decorative finish, can also be used with other bottom seafood (need to be verified).
Hard work (50% humidity "15℃C< 48h; 25'< 24h
Construction data table dry (50% mixing) 15℃℃< 1h; 25℃< 0.5h 0.12-0.2kg/z '(dry film 35μm)
Density about 1.1-1.20g/om) theoretical coating rate
It is recommended to paint 2 pieces, which can be painted in the way of temperature touch temperature, to ensure that the dry capacity is 40-60μm, if the interval is long, it is necessary
It needs to be sanded.
Construction method can be painted or brushed. Before use, mix the paint mold evenly, adjust the construction viscosity according to the different construction methods, and add 5-15V water. Add clean water in the mixing state, stir evenly, and allow the surface to be free of bubbles before construction.
1. The construction site should have good ventilation and dust removal facilities to ensure the quality of construction.
2. The construction temperature is above 5℃, and the relative humidity of the environment should be < 70%.
3. The miscibility of the substrate is not less than 5℃, which should be more than 3℃ higher than the air dew point temperature.
Precautions and other data are the same as "H901 water-based anti-rust paint", please refer to.
Application field
With suitable water-based primer, it is suitable for metal surface decoration of steel structure buildings and workshops, agricultural vehicles, machinery and equipment in light corrosion environment, and has good outdoor weather resistance and UV resistance.
Construction description
1. Clean the oil, rust, old patent leather and other dirt on the surface of the substrate before painting to ensure that the surface of the substrate is clean and dry.
2. Grinding wheel is used to remove welding bumps, spatter, and hardened layer on the workpiece surface. All free edge acute angles after gas cutting, shearing or machining should be polished to R2.
3. Sand blasting to Sa2.5 level or power tool cleaning to St2 level, construction within 6 hours after sand blasting.
4. Brush painting and spraying can be used for construction, and the paint should be stirred evenly before painting. If the viscosity is high, an appropriate amount of deionized water can be added, and the amount of water added should not exceed 10%, and it should be stirred while adding to ensure that the paint is uniform.
5. Maintain good ventilation during construction, and do not recommend construction when the ambient temperature is lower than 5 ° C or the humidity is greater than 85%.
6. Rain, snow and fog weather can not be constructed outdoors, such as construction, can be taken to protect the paint film by covering it with tarpaulin.
Storage and transportation
1. The product should be sealed and stored in a dry and well-ventilated warehouse with a storage temperature above 5 ° C and below 35 ° C to prevent direct exposure to water and sunlight, isolate the fire source, and stay away from the heat source.
2. If the product meets the storage conditions, the storage period is one year from the date of production, and the storage period can be tested beyond the storage period. If it meets the standards, it can still be used.
3. During the transportation process, the product should be prevented from cold, rain and sunlight exposure, and should comply with the relevant provisions of the transportation department.
Notes
● In the high temperature season construction, easy to occur dry spray, in order to avoid dry spray can be adjusted to dry spray until the diluent.
● This product should be used by professional painting operators according to the instructions on the product packaging or this manual.
● All work on the coating and use of this product must be carried out in accordance with various health, safety and environmental regulations and standards.
● If you have any questions about the use of this product, please contact our technical service department for details.
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.
