Special texture powder coating powder paint/Alkyd dip coating special paint/Waterborne fast drying dip paint
Product introduction
It is composed of modified water-based acrylic acid epoxy emulsion, deionized water, water-based auxiliaries and environmental protection frequency filler.
Recommended use
It can be used for anti-corrosion coating of steel structure, metal components, automobile plate spring, automobile chassis, automobile axle, automobile parts, and other metal parts.
Details
CAS No.:25135-73-3
Other Names:paint coating
MF:C22H26O10
EINECS No.:203-652-6
Place of Origin:Fujian, China
Main Raw Material:Resin
Usage:Appliance Paint, Building Coating, Car Paint, Furniture Paint
Application Method:Spray
State:Powder Coating
Brand Name:KINDA
Model Number:EP9807
Shape:Powder
Color:Customized Colors
MOQ:100kgs
Gross weight:20kg
Supply Ability:300 Ton/Tons per Month
Packaging Details:PE Bags, Cartons and Pallets
Carton Size:30*25*30cm
N.W: 19KG
G.W: 20KG
50cartons/Pallet
18tons/20ft
Port:Fuzhou Port,China
Technical parameters
Surface dry (50% humidity) 15'C< 1h ; 25℃C< 0.5 h.
Work (50% humidity) 15℃C< 72h;
25℃C< 48h
Punch (kg ·cm) 50
Mitsuzawa > 40-60%
Hardness 0.3 (double pendulum)
Mechanical Properties Test Film thickness (23±3μm)
Adhesion (hundred-cell method) Level 1
Main characteristics
1. Low VOC, low irritating odor, in line with the requirements of environmental product labeling, environmental protection products.
3. Self-drying and low temperature baking (high temperature baking, better performance), high hardness, excellent wear resistance, compatibility.
4. Excellent adhesion to metal substrate, excellent physical and mechanical properties after drying.
Construction description
Construction data
Table dry (50% mixing degree) 15'<1h; 25℃<0.5h Solid dry (50% humidity) 15℃℃<72h; 25℃<48h Density about 1 1-1.20g/cm' Theoretical coating rate 0.15-0.2kg/m ((dry film 40-50μ))
It is recommended to apply 2 coats, which can be applied in the way of wet mixing to ensure that the dry film is 40-60 μm.
To be sanded and finished with sandpaper.
Construction method
Mainly diffuse coating, spraying or brushing, mix the paint evenly before use, adjust the viscosity according to different construction methods.
Add 5-15% of the right amount of clean water. Stir state to add water, stir evenly, leave the surface without bubbles after that can be horror work.
construction viscosity
Add 5-15% clean water. Stir state Add clean water, stir evenly, and leave the surface without bubbles.
1. The construction site should have good ventilation and dust facilities to ensure the quality of construction.
2. The construction temperature is above 5℃C, and the relative humidity of the environment should be < Seventy percent.
3. The substrate temperature shall not be lower than 5'C and shall be higher than the air dew point temperature of 3C.
Tool cleaning and other instructions are the same as "H901 water-based anti-rust paint", please refer to.
Construction Environment
1. The construction site should have good ventilation and dust facilities to ensure construction quality.
2. The construction temperature shall be above 5°C C and the ambient relative humidity shall be <70%.
3. The temperature of the substrate shall not be less than 5'C and shall be 3C above the air dew point temperature.
The data for tool cleaning and other descriptions are the same as for "H901 waterborne antirust paint".
Surface treatment
The surface of the coated material requires no moisture, no oil, no acid, no ash and so on.
Oxidized steel: Treated to Sa2.5 by means of peening or sandblasting, and where sandblasting cannot be performed, mechanical grinding or chemical treatment should be performed to remove all floating shoulders.
Non-oxide steel: sandblasting (shot blasting) treatment to Sa25 or wind, electric grinding machine grinding to St3,
Welding, flame cutting or pyrotechnical burning parts: grinding to St3 level.
Old paint film substrate: Remove the checked old paint film and rust, and polish it to $t3 with pneumatic and electric grinding tools.
FAQ
Q. Are you factory or trading company?
A. We are a factory located in Fuan city, Fujian province, China .
Q. Are all colors are same price?
A.No, the price are different depend on the texture, availability, Ingredients and So on.
Q. Can you provide samples for quality checking before placing an order?
A. Samples are available upon request, but the shipping cost should be paid by customer.
Q. Is there a discount?
A. The discount will be given by the quantity.
Q. How about delivery time?
A. About 7-15 days after payment confirmed.
Q. What kind of payment terms you can accept?
A. We accept T/T, LC, Western Union and Paypal.