Water Based Acrylic Antirust Primer
Product introduction
Product features
* Water as the dispersion medium, non - combustion, non - explosion, no pollution
* Harmless to human health
* Safe and convenient construction, fast drying, high construction efficiency
* Excellent mechanical strength
* Low temperature stability
* Excellent weather resistance and decoration
Application
* Used on the surface of iron and steel materials for rust prevention and decoration
* Manufacture and maintenance of ships, railway vehicles, automobiles, agricultural vehicles and other transport vehicles
* Oil field and petrochemical machinery, pipelines, storage tanks
* Machinery and equipment in metallurgy, electric power, textile, food and other industries
* Bridge, iron tower, grid and other steel structures
Painting interval
Substrate temperature 10℃ 20℃ 30℃
Shortest 4h 2h 1h
Maximum unrestricted
Surface treatment
Sand blasting or grinding to Sa2 or St3 level, completely remove oil stains, rust and old paint film on the surface of the substrat
Packing specification
20kg, 25kg/ barrel
Storage life
0-40℃, 6 months
Transport
According to the transport of non-dangerous goods
Note
1. This product is water-based paint, can not be mixed with organic solvents or solvent based paint.
2. Mix well before use and adjust viscosity with appropriate amount of water.
3. When diluting the product, gradually add water to dilute it to the construction viscosity.
4. Wash tools with water immediately after use.
5. It is not suitable for construction when the temperature is lower than 0℃ and the relative humidity is higher than 85%.
|
Standard parameters of water-based acrylic paint (refer to HG/T4758-2014) |
||||
|
Items |
Indicator (type II one-component) |
|||
|
primer |
||||
|
Status in the container |
No hard lumps after stirring and mixing , uniform status. |
|||
|
Storage stability [(50±2)℃, 7d |
No abnormality |
|||
|
Non volatile content, %≥ |
Varnish |
30 |
||
|
paint |
50 |
|||
|
Fineness /μm ≤ |
||||
|
Appearance of paint film |
||||
|
Drying time/h |
Surface dry≤ |
2 |
||
|
Hard work≤ |
24 |
|||
|
Bending test/mm ≤ |
2 |
|||
|
Impact resistance/cm ≥ |
40 |
|||
|
Cross-cut test /grade ≤ |
1 |
|||
|
Gloss (60°)/unit value |
agreed |
|||
|
Hardness (pencil) ≥ |
||||
|
Water resistance (24h) |
No blistering ,No shedding,slight discoloration is allowed |
|||
|
Salt water resistance (3%, NaCl, 96h) |
||||
|
Artificial weathering resistance (500h) |
No blistering ,No craking,No peeling,No chalking; |
|||
Details
Place of Origin:Guangdong, China
Main Raw Material:Epoxy
Usage:Car Paint
Application Method:Spray
State:Liquid Coating
Brand Name:MJ COAT
Model Number:car paint manufacture-1c1e
Classification:1K
Basecoat Features:Magnificent optical effect, high gloss
Substrates:Existing finishes, 2k & 1k intermidiate primer
Color:Superfine
Silver Sample Time:Within 3 days
MOQ:100L
Product Keywords:acrylic raw material car 2k top color paint
Supply Ability:50000 Liter/Liters per Day
Packaging Details:1L*12 cans car paint manufacture
Port:Guangzhou or by requested
Lead Time :Within 25 days after receiving the deposit
| Classification | 1K Basecoat |
| Features | Magnificent optical effect, high gloss |
| Substrates | Existing finishes, 2k & 1k intermidiate primer |
| Color | Superfine Silver |
| Packing | 1L*12 cans |
| Sample Time | Within 3 days |
| MOQ | 100L |
| Product Keywords | acrylic raw material car 2k top color paint |
Features: It is high solid content and fast dry acrylic clear coat. Especially formulated for spray over 1K base coat to give very glossy finishing. Excellent yellow and weather resistant. Outstanding flow, leveling and anti-scratch. Good thick film and clear appearance.
|
NO. |
Test Item |
Quality Datas |
|
1 |
Item No. |
ES950/980 |
|
2 |
Product name |
High Solid Clear Coat |
|
3 |
specific gravity(KG/L) |
0.95±0.05 |
|
4 |
Viscosity |
35-45 Seconds |
|
5 |
spray pressure(MPA) |
3.0-3.5kg/cm² |
|
6 |
Solid content |
56% |
|
7 |
Ratio(clear coat:hardener:thinner) |
100:30:(15-25) |
|
8 |
Skin dry time (25℃) |
45 mins |
|
9 |
Fix time (25℃) |
12 hours |
|
10 |
Glossy(60°℃) |
98 |
|
11 |
Shelf life |
2 years in original sealer can in cool and dry place at 20℃. |
Application field
It is suitable for general anti-rust requirements and pay attention to decorative products, and can maintain good anti-corrosion effect in light corrosion environment. Used for general protection and temporary protection, such as engineering tracks, plate springs, outdoor railings, etc.
Construction description
1. Clean the oil, rust, old patent leather and other dirt on the surface of the substrate before painting to ensure that the surface of the substrate is clean and dry.
2. Grinding wheel is used to remove welding bumps, spatter, and hardened layer on the workpiece surface. All free edge acute angles after gas cutting, shearing or machining should be polished to R2.
3. Sand blasting to Sa2.5 level or power tool cleaning to St2 level, construction within 6 hours after sand blasting.
4. Brush painting and spraying can be used for construction, and the paint should be stirred evenly before painting. If the viscosity is high, an appropriate amount of deionized water can be added, and the amount of water added should not exceed 10%, and it should be stirred while adding to ensure that the paint is uniform.
5. Maintain good ventilation during construction, and do not recommend construction when the ambient temperature is lower than 5 ° C or the humidity is greater than 85%.
6. Rain, snow and fog weather can not be constructed outdoors, such as construction, can be taken to protect the paint film by covering it with tarpaulin.
Storage and transportation
1. The product should be sealed and stored in a dry and well-ventilated warehouse with a storage temperature above 5 ° C and below 35 ° C to prevent direct exposure to water and sunlight, isolate the fire source, and stay away from the heat source.
2. If the product meets the storage conditions, the storage period is one year from the date of production, and the storage period can be tested beyond the storage period. If it meets the standards, it can still be used.
3. During the transportation process, the product should be prevented from cold, rain and sunlight exposure, and should comply with the relevant provisions of the transportation department.
Where to Use
for interior masonry surface: brickwork, plaster, cement, and asbestos
for use on both new and previously painted surfaces.
Properties
excellent alkali resistance.
minimizes the risk of efflorescence and seals off the substrate.
Maximum hiding
Great for a variety of interior surfaces
Excellent all-around stain blocker
Quick drying
Low VOC, low odor
S3 Acrylic Based Primer can be stored up to 12 months in an elevated, cool dry place in original packaging.
Characteristics
Water-based
Acrylic
Good resistance to the elements. Contains a UV protector
Glossy or Matte finish
Excellent flexibility and hardness
Does not yellow
Easy to apply with a roller, air gun or brush (in some cases it may require dilution for better application)
Can be recoated
Good adhesion to paint and mineral surfaces like natural stone, plaster, stucco, etc.
Company Information
MIT-IVY INDUSTRY CO.,LTD is a manufacturer and exporter of fine chemical dyes & pharmaceutical intermediates in China.
Mainly produce aniline series products and chlorine series products.
MIT –IVY Chemicals Industry Co.,Ltd. is a leading manufacturerof chemical for 21 years with complete production equipment and meticulous management and maintenance of machinery.
We use advanced production technology and test methods to realize production, quality controlling to meet the standard. We have been approved by SGS, ISO9001, ISO140 01, GB/HS16949 and T28001.
Mit-Ivy main products include as the following：
API, pharmaceutical intermediates ,Dye intermediates, fine,speciality chemicals,Waterborne industrial paint and new energy materials.
Our main markets includes America, India, Africa, Indonesia, Turkey, South-east Asia, West Asia and so on. MIT-IVY Industry Main products shares 97% of the domestic market specializing in the production and management, We can supply the products with more competitive cost. with premium quality and price and welcome to consult. Our company has professional persons who major in chemical R&D and sicentific management, supply fine chemical products with high quality and close service, also supply custom-tailored products according to our clients’ requirement. We have a positive and self-motivated management work team with a common philosophy, caring and commitment through teamwork, our team strive to achieve success in delighting our clients and ourselves. we continuously innovate our products and improve our service, sales network. Hence, we initiate the first sale mode on net in China, which is the retail trade of small package bring along wholesale of diversified management modes. Our products are exported widely to South Korea, Vietnam, Australia, Europe and South America, highly recommended by our clients. We insist on the management creed “Market is our compass, Quality is our life, Credit is our soul”. Clients’ trust is our forward powder, their satisfaction is our struggling goal.
Brand Customer Service:
Our JIT customer service account team network in China develop and implement tailor-made concepts for the optimum supply of our customers with industrial and specialty chemicals.
Your advantages:
● Centralized customer service supports simplification of administrative procedures, resulting in time and cost saving.
● Our Chinese network and sophisticated logistics solutions ensure that chemicals of identical quality are supplied to customers with several manufacturing locations and contribute to security in planning and reliability of processes.
● Our processes are continuously optimized and adapted to our customers’ changing structures and requirements.
Superiority of Chemistry Logistics service:
Chemical logistic service is very professional and should be superior under UN regularity, especially for DGR Class series. We provide a special-purpose solution to optimize logistic and suitable packing group and labeling service for our principals. Our main Chinese ports with DGR chemical warehouses are to operate specialty chemical and apply all relative paperwork concerned.
Our distribution capabilities include:
● Flexible deliveries, intelligent solutions
● Anything from bulk shipments of thousands of tonnes down to the smallest shipment of packed goods and even samples.
● Bulk – storage and transport of powders and liquids – movement of goods in ships – powders and bulk liquids
● Pharma, feed and food storage to accredited standards
● Segregated materials by business unit and hazard classification
● Temperature controlled storage and transport
● Effective cost control
● Re-packing, drum filling, bagging, ripping and tipping
● Customer delivery KPI's on delivery fulfillment performance
If you are interested in getting more quotations,
please add WHATSAPP:0086-13805212761 or E-MAIL:info@mit-ivy.com
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.
